[TN27] High Conductivity Coppers - Technical Data (Archive)

Publication date: 1968-72

>> See download links above each table

---

These archived data sheets, prepared by the International Copper Development Council (CIDEC), were originally published in a series covering all the main coppers and copper alloys during the period 1968-72.

They contain an invaluable summary of data relating to the physical and mechanical properties of the materials at low, ambient and elevated temperatures which is not available elsewhere.

Tensile, hardness, impact, creep and fatigue data have been abstracted from the relevant original literature.

These sheets provide information relating to the wrought coppers, low alloyed coppers and high copper alloys. Information on the binary and leaded brasses is contained in publication TN26.

Introduction

Due to increasing demand from engineering designers and others for this type of information in readily accessible form, the decision was made to reprint the data sheets in bound form.

The first book provided information relating to the brasses and this second book covered the coppers in high conductivity copper alloys. Since the original editorial facilities are no longer available, it has not been possible to update the information given. Generally it will be found still valid.

For information updating the national and ISO specifications quoted for manufactured forms, please refer to national standards organisations.

Wrought Materials – Coppers

>> Download Copper datasheets A1-A6

Wrought Materials – Low-Alloyed Coppers

>> Download Low-Alloyed Coppers datasheets B1-B5

Wrought Materials – High Copper Alloys (96-99% Cu)

>> Download High Copper Alloys datasheets C1-C8